This paper presents the design, simulation and realization of a patch antenna for IOT applications. The patch antenna consists of a radiating element printed on one face of a dielectric substrate, when the ground plane is placed on the other face. In this work, two techniques are used to design a miniaturized patch antenna: the set-up of slots on the radiating element and the use of defective ground plane. Also, the slot’s radius and Length of inset point effects on the performances of the antenna is illustrated. All the simulated results are performed with FEKO, a solver based on a Moments Method and measurement is made using Vector Network Analyzer Anritsu MS2026C. The propose antenna resonates in three frequency bands 3.91, 4.86 and 5.16GHz for different characteristics such as radiation pattern, gain, return loss, which makes it suitable for many wireless communication applications such as IoT applications.
