درخت حوزه‌های تخصصی

The study of path loss propagation is of high importance in telecommunication, for optimizing the efficiency of wireless communication networks. In this paper, four path loss propagation models; free space path loss (FSPL) model, Okumura model, Okumura-Hata model, and COST 231-Hata model were compared. The models were compared using measurement data from Choba, Port Harcourt, Nigeria. The data is gotten from a 4G walk test using two mobile applications. The first mobile application Network, Signal Info (version 5.68.07), was used to acquire the received signal strength in and the distance between the BTS antenna and the mobile antenna. While the second mobile application, G-NetTrack Lite (version 14.8), was used to map out the track path followed during the test. Choba, the study area, is a coastal suburban area with map coordinates 4.8941° N, 6.9263° E. The measured distance range was from 0.09 km to 0.45 km, and a path loss range of 69dB to 81dB. While the BTS and mobile antenna heights were 32 m and 1m respectively, with a carrier frequency of 800MHz. BTS transmission power of 23 dBm was assumed, based on 3GPP eNodeB recommendations. A graph comparison of the studied models showed that Okumura-Hata model and COST 231-Hata model had the closest predictions to the measured path loss. The need for better path loss models for 4G and 5G propagations was observed

The article explores approaches to assessing the quality of health care sites. The main components of evaluation are identified. The author's toolkit for health site evaluation is offered. It is based on the three branches of resource competitiveness (content, technical and marketing components). Twenty parameters of site quality calculation are defined, which have the scale and are supported by determining the weights of components. The scaling of the resulting indicator is proposed. It allows designation of the level of development of the particular site in the field of health. The practical approbation of the proposed method was carried out on the example of Ukrainian sites on the topic of rehabilitation and disease prevention. The diagram of the grouping of websites on a level of development of separate components is constructed to define the further directions of work with these sites to strengthen their competitive positions in the "Health" category. The author's typology of health sites depending on the calculated numerical combinations of the quality assessment level of components is given. It also describes the state of the "ideal" mix of components of the health site, which is formed based on the balance of individual elements.

The article investigates in-depth the theoretical provisions for the construction of modern product quality management systems, providing for the optimization and transformation of individual production and economic processes to a higher quality level, as well as the functions integration of enterprise management system and product quality management system; such integration is carried out on the basis of knowledge, information and communications, which are the basis of external integration processes of the enterprise. This provided an opportunity to develop a scientific and methodological approach to the formation of an adaptive quality system capable of producing high quality products over a long period of time. The generalization of practical aspects of the research provided an opportunity to build an algorithm and determine the tools for the formation of an adaptive product quality management system using modern computer technology for effective information support.

As an emerging technology, blockchain can be used in all areas of e-commerce, one of which is advertising. The present study has been designed to identify a dynamic model of trust in blockchain-based advertising and acceptance of this type of advertising. In order to achieve the purpose of the research, the required information was collected by literature, background review and experts opinions. In the next step, the research information was analyzed using systems dynamics methodology (Sterman approach) and a dynamic research model was presented. After model validation and examining the causal relationships, simulations and scenario analysis were performed using Vensim software. The results show the positive effect of the audience, advertiser and advertising characteristics on trust in blockchain-based advertising and, consequently, the improvement of the audience loyalty coefficient. Also, the results of scenarios indicate an ascending growth (Pessimistic: about %60, Optimistic: about %80) in audience loyalty. Finally, practical suggestions were presented in accordance with the research results

Scientific sources demonstrate different attitudes of researchers to cryptocurrencies because they treat them as a category of currency, virtual money, commodity, etc. Accordingly, the relation to the valuation and risk of cryptocurrency as an investment object is different. The purpose of the article is to identify cryptocurrency value formation factors and determine the risks of investing in cryptocurrency. Cryptocurrency is simultaneously considered a currency, an asset with uncertain income, and a specific product, the price of which is determined by the energy costs for mining new cryptocurrency blocks. Thus, the paper examines the risks of investing in cryptocurrency from several positions. First, the study identifies the factors of formation of the value and risk of cryptocurrency as ordinary money based on comparing cryptocurrency with traditional money. Unlike traditional money, cryptocurrency is not tied to the economic performance of a particular country; also, central banks do not control or regulate their mining. Instead, the cryptocurrency emissions depend on the computational capacity of the equipment used for their mining. As a financial asset, cryptocurrency can be a “financial bubble” because their value increasing often exceeds the cost of mining. On the other hand, given the emergence of cryptocurrency as a phenomenon of the information economy, the paper analyses the impact of specific technical features (cryptographic hashing algorithm, the complexity of creating new blocks, the technology of verification of mining operations, etc.) on the risk of investing in cryptocurrency assets.

In recent years, Blockchain technology has been recognized as one of the most important new technologies affecting businesses and society, with a very bright future ahead. This technology is known as one of the most critical technologies of industry 4. Given that Blockchain technology is a new concept, before implementing it, the organization must understand it and be prepared to accept it; otherwise, the organization will incur irreparable damages. The main purpose of this study is to provide a framework within which organizations can evaluate their readiness to implement Blockchain technology. For this purpose, after a library study and systematic literature review, this study provided the initial research framework using the meta-synthesis method. Finally, the Lawshe model was applied to validate the proposed framework for the organization's readiness to implement Blockchain technology. Based on the findings, the final established framework included seven main dimensions, including Blockchain-based business strategy, operations of a distributed system, culture, people in Blockchain decentralized network, decentralized governance, technology, and Blockchain-based product traceability. Besides, 37 main criteria affected these dimensions, which can help companies increase the level of Blockchain technology readiness. Finally, this framework was used to measure the readiness of an airline company. According to the results of the analysis, Blockchain-based business strategy, culture, and Blockchain-based product traceability showed a medium level of readiness. Moreover, none of the main dimensions of Blockchain technology readiness were sufficiently prepared in this case study. This paper suggests practical recommendations to improve the level of Blockchain technology readiness for the managers

The improved model of the Agile Kanban (i-KAM) is developed to enhance the software project monitoring task when employing Agile project management (APM) approach. The i-KAM have been initially verified by 11 knowledge and domain experts. In consequence, it has been reconstructed and enhanced based on the remarks and recommendations provided by the experts. This paper aims to present the final evaluation results of i-KAM achieved from seven software practitioners participated in a focus group. The focus group method was selected because it is an empirical approach used in the evaluation studies conducted in the software engineering (SE) domain. Therefore, this method was employed to obtain the practitioners’ feedback on the proposed model. Results confirm the effectiveness of i-KAM, in which it can assist the project managers and team members in monitoring their projects’ progress effectively. In addition, it is indicated that i-KAM is an applicable model with easy and practical implementation. This study contributes to improve the task of monitoring software development projects within the APM environment. Accordingly, this would systematically facilitate the top managements’ work, and assist in making meaningful decisions regarding to the management of projects’ workflow. Practically, case studies will be carried out in different software development organizations (SDOs) to implement i-KAM in actual projects within real environments

The Architecture, Engineering, and Construction (AEC) industry rely heavily on Building Information Modeling (BIM). BIM is the collection of Information and Communication Technologies (ICT), interacting policies, and procedures. BIM is a tool for managing digital project data during the life cycle of a building. Despite the many benefits and features of BIM, the Malaysian construction industry's proliferation is confronted with adoption issues. Therefore, this research study intends to find the effect of BIM adoption factors in Malaysian AEC. Quantitative data collection from construction firms is gathered. The proposed model's theoretical foundations are based on Technology, Organization Environment framework. The model is tested and validated with the Smart PLS tool. The study's findings indicate that Perceived benefits, Organizational Capabilities, and Trialability are drivers of BIM adoption. Perceived cost and Insecurity are the barriers to BIM adoption. Perceived ease of use and compatibility does not affect BIM adoption. Finally, this study performs Importance Performance Map Analysis to provide recommendations to AEC stakeholders to address the BIM adoption issues for enhancing its diffusion in Malaysia.

Focusing on the problems faced by blind people, this paper has come up with the technology solution for the assistance of blind people. The solution is based on the intelligent data transmission to the earphone of a person based on task associated. The solution consists of a jacket to detect the obstacles along with a wearable box with task priority switchs. The system helps in detection of the obstacle and its height, one-touch cab booking and support of relatives, Ambulance services, Police services, etc. in the case of emergency. Either wired and wireless headphones or speakers can be interfaced with the device (box) to get audio notifications. The various tasks are triggered using multiple switches. The system will use a definitive SOC (System on Chip) platform recognized as Rasp-Pi-Pi along with ultrasonic sensor HC-SR04, Neo-6M GPS (Global Positioning System) module, and different switches. The system uses a 20,000 mAh lion battery for the power supply. The voice signals can be provided in more than fifty languages. A fall detection system is also discussed in this paper. This system will be beneficial not only for blind but also for care of old aged people

Day by day demand for object tracing is increasing because of the huge scope in real-time applications. Object tracing is one of the difficult issues in the computer vision and video processing field. Nowadays, object tracing is a common problem in many applications specifically video footage, traffic management, video indexing, machine learning, artificial intelligence, and many other related fields. In this paper, the Enhanced Method of Object Tracing Using Extended Kalman Filter via Binary Search Algorithm is proposed. Initially, the background subtraction method was used for merge sort and binary search algorithm to identify moving objects from the video. Merge sort is to divide the regions and conquer the algorithm that arranges the region in ascending order. After sorting, the binary search algorithm detects the position of noise in sorted frames and then the next step extended the Kalman Filter algorithm used to predict the moving object. The proposed methodology is linear about the valuation of mean and covariance parameters. Finally, the proposed work considered less time as compared to the state of art methods while tacking the moving objects. Its shows less absolute error and less object tracing error while evaluating the proposed work.

In the era of internet technologies, to provide wireless communication and transfer the information in seconds from one place to another has arrived because of the need to consume information technologies. All users desire to quickly access the smart world’s life and interact with the entire world socially. This paper proposed an environment for the safe and secure smart patient’s room connected to the WSN, BAN, and RFID. All the data will be transferred to the session key, secure and contains the patient’s information. The network connected through WSN and data will be sent through the session key to make an smart hospital’s patient cabin. The small token is there that will be transferred throughout the network to get authenticated by each network. This proposed scheme is secure enough to overcome the drawbacks of the other protocol in such a way as to make the protocol more secure from the entire adversary’s attack may occur.

The reconstruction of 3D images is always a difficult task for the researchers. The 3D reconstruction of the image is a core technique of various fields such as Computer graphics, computer vision, CAD systems, medical science, computer application, etc. Reconstruction of the 3D image allows us to gather the quantitative features of the objects such as the shape, size, and volume of the objects. The existing computer algorithms need spatial dimension information to make the distinguished inference from the given 3D image which is not always possible. This paper simplifies the 3D reconstruction of the image. This research paper introduced a novel algorithm for the representation of the Three Dimensional images into a textual form.  The syntactic approach is used for the extraction of the features of the image and these are called knowledge vectors. The knowledge vector consists of the direction information and length information. This a new approach in the field of image processing where images can be represented as a knowledge vector and it could be a great contribution in the field where security is a major concern. Further, the knowledge vector is used for the reconstruction of the 3D image. The performance of the algorithm is evaluated on the PASCAL 3D + and example-based Synthesis of the 3D Object Arrangements dataset. According to the obtained results, the proposed methodology is having better accuracy, and the processing time of reconstruction of the original 3D image is 1.02 Seconds. Single-pass is sufficient for reconstructing the original image

Malware attack is growing day by day in cyberspace. And Wireless Sensor Network (WSN) is also facing a hazardous type of situation due to attack of malware (malicious code, virus, worm etc.). Malwares target sensor nodes easily because, nodes are equipped with limited resources. Hence, security of WSN against malware attack is one of the imperative requisite. Malware spreads in the entire network wirelessly, which initiates from single infectious node and spread in the whole WSN. In this way the complete network comes under the security threat. Therefore, it is mandatory to apply the security technique through which to secure WSN against malware attacks. To secure WSN due to malware attacks a quarantine based model has been proposed. The proposed model consists of various epidemic states namely: Susceptible Carrier - Infectious - Quarantine - Recovered - Susceptible (SCIQRS). The model explained the propagation dynamics of malware in WSN and proposed a technique to prevent its propagation. The technique of quarantine along with recovery is to much effective in prevailing of malware propagation in WSN. For the determination of WSN stability and equilibrium points the expression of basic reproduction number has been obtained. Malware propagation is affected by different network parameters, which has been also discussed. The comparative investigation of proposed model has been carried out with existing model. The proposed model has been substantiated by simulation outcomes