آرشیو

آرشیو شماره ها:
۴۳

چکیده

تغییر شکل خاک می تواند تأثیر عمده ای بر ورودی های طراحی لرزه ای سازه ها داشته باشد. در عمل، خاک اغلب توسط سنگ های پیرامونی احاطه شده است. در این حالت، وقوع پدیده تشدید یا تشدید لحظه ای به دلیل نزدیک بودن فرکانس سازه به فرکانس طبیعی خاک، می تواند اثرات مخربی داشته باشد. ازاین رو، فرکانس طبیعی خاک در آیین نامه های ساختمانی در ارائه شکل طیف موردتوجه است. در این مقاله، از روش H/Vبر پایه اندازه گیری غیر مخرب نوفه های محیطی برای تعیین فرکانس طبیعی خاک شهر بهبهان استفاده شده است. این روش روشی ارزان و موفق برای ارزیابی خصوصیات خاک است. بعد از ثبت داده های میکروترمور در 69 ایستگاه، تحلیل H/V برای برآورد فرکانس تشدید نقاط برداشت شده انجام گردید. سپس نقشه های فرکانس طبیعی خاک ارائه گردید. نتایج نشان می دهد محدوده فرکانس طبیعی خاک در شهر بهبهان در بازه 57/0 تا 42/5 هرتز است. این نوع خاک در محدوده خاک نوع 2 و 3 (استاندارد 2800) قرار می گیرد. همچنین بر اساس اطلاعات ساخت وساز در پهنه شهر بهبهان، نقشه مناطق مستعد تشدید ارائه شده است.

Determining the Natural Frequency of Behbahan City Soil Using Microtremor Data Analysis

Soil deformation can have a major impact on the seismic design inputs of structures. In practice, the soil is always bounded by rocks. In this case, the phenomenon of resonance or beating due to the closeness of the frequency of the structure to the natural frequency of the soil can be very destructive. For this reason, the natural frequency of the soil is considered in the construction regulations in presenting the spectral shape. To determine the natural frequency of soil in Behbahan city, the H/V method based on non-destructive measurement of ambient noise, which is a inexpensive and successful method for evaluating soil properties, was used. After recording microtremor data in 69 stations, H/V analysis was done to estimate the resonance frequency at the points. Then, natural frequency maps of the soil were presented. The results showed that the natural frequency range of soil in Behbahan city is between 0.57 and 5.42 Hz. Therefore, this soil is included in soil types 2 and 3 (standard No. 2800). Moreover, based on the construction information, a resonance-prone areas map was provided. In the central areas, the soil type is mainly type 3. Most of the buildings in this area are low codes, so it requires more precision in future developments. In the northwest and southeast of the city, the period of soil resonance is more than one second; therefore, in the construction of tall buildings in these areas, more strict measures should be taken into account to control the structures.

تبلیغات