پهنه بندی فرسایش در حوضه آبخیز کهمان با استفاده از سه مدل EPM ، BLM و Fargas
آرشیو
چکیده
تولید رسوب یکی از پیامدهای مهم فرسایش خاک است و در شکل های مختلف سبب اثرات درون و برون منطقه ای می گردد. با توجه به این که هر ساله هزاران تن خاک حاصلخیز از اراضی مختلف کشور، در اثر فرسایش از دسترس خارج شده و با انباشت در مناطق رسوب گذاری، موجب بروز خسارات قابل ملاحظه ای می شوند، بنابراین، لازم است مناطق تولید رسوب همراه با شدت و مقدار آن شناسایی شوند تا از این طریق علاوه بر تعیین مناطق بحرانی و رده بندی مناسب بتوان اقدام به برنامه ریزی در قالب طرح های حفاظت خاک و یا آبخیز داری نمود. در این تحقیق با استفاده از سه مدل برآورد و پهنه بندی فرسایش و رسوب، شامل EPMn style="font-size: small;"> ، BLM و Fargas با هدف شناسایی و معرفی مدل مناسب، اقدام به ارزیابی مدل ها در پهنه بندی فرسایش در حوضه آبخیز کهمان شده است. اعتبارسنجی مدل EPM نشان داد که این مدل برای این حوضه آبخیز مناسب نیست زیرا مقدار رسوب برآورد شده را بسیار بیشتر از مقدار واقعی نشان می دهد. براساس مدل EPM مقدار رسوب کل حوضه 6/181320 متر مکعب در سال برآورد شد. اما بر اساس اطلاعات ایستگاه هیدرومتری منطقه مورد مطالعه، مقدار رسوب واقعی حوضه 8/75416 متر مکعب در سال می باشد. با توجه به بازدیدهای صحرایی از منطقه فرسایش موجود با فرسایش به دست آمده از مدل فارگاس نیز مطابقت ندارد اما مدل BLM با فرسایش منطقه مطابقت بیشتری دارد.Determining the Erosion in Kahman Drainage Basin Using EPM, BLM and Fargas Models
Sediment yield is one of the important results of soil erosion, that causes on-side and off-site effect. Considering that each year thousands tons of soil from different lands of our country become out of access due to erosion and accumulation in sedimentation areas causing considerable damage, it is necessary to identify the potential sediment yield areas, determine the critical areas and employ proper classification, to plan for soil conservation or watershed management. In this study, three models, including EPM, BLM and Fargas, were used for estimating and zoning the erosion and sediment to identify and introduce proper action model to evaluate models for zoning erosion in Kahman drainage basin. The validation of the EPM model showed that this model is not proper for this drainage basin because it showed the amount of sediment estimate more than the actual amount. Based on EPM model the total sediment in drainage basin was estimated 181320/6 cubic meters per year. But based on the information from the hydrometric stations in the area under study, the actual sediment is 75416/8 cubic meters per year. Also, according to field observations of erosion in the area under study, available erosion does not match the obtained erosion from the Fargas model but the BLM model matches the erosion of the drainage basin more.